Installation precautions for solenoid valve

1.During installation, it should be noted that the arrow on the valve body should be consistent with the flow direction of the medium. Do not install it in a place with direct dripping or splashing water. The solenoid valve should be installed vertically upward;

2. The solenoid valve shall ensure normal operation within a fluctuation range of 15% - 10% of the rated voltage of the power supply;

3. After the installation of the solenoid valve, there should be no reverse pressure difference in the pipeline. It needs to be powered on several times to make it suitable for temperature before it can be officially put into use;

4. Thoroughly clean the pipeline before installing the solenoid valve. The medium introduced should be free of impurities. Install a filter in front of the valve;

5. When the solenoid valve fails or is cleaned, a bypass device should be installed to ensure continued operation of the system.